Shot Darts.

Joker Driver Zero Carbon Shaft
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.


They are so beautiful Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.


Probably the most expensive set of shafts I'll ever buy :3
Reply
knowing my luck i'd throw a robin hood with them first session. Good looking stems Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Match Darts: 23g MasterDarts Gold MVG's or Gary Anderson phase 3
Highest out 155 (T-19 T-20 D-19) Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
2015 180's Goal Progress: 108/180

Reply
Those are really nice but expensive. $18/set here. They also have the 2-tone carbon shafts. Black and purple. Or is it L-Style? They really are good stuff. They are not Robin Hood proof but RH resistant only. Meaning they break after more or less 5 RH occurences.
Reply
Holy smokes. I'd be afraid to use them.
Reply
Nice!
I was going to buy a set back when I had my Joker Driver barrels.

They come with the two different rear sections, correct? One for standard flights, one for Fit flights?

Definitely one of the best carbon setups around...it's a actual REAL carbon fiber weave with a gel coating.
Reply
https://www.jdarts.com/index.php?route=product/category&path=23_213
Reply
(12-01-2014, 06:10 PM)majeek Wrote: Those are really nice but expensive. $18/set here. They also have the 2-tone carbon shafts. Black and purple. Or is it L-Style? They really are good stuff. They are not Robin Hood proof but RH resistant only. Meaning they break after more or less 5 RH occurences.
These are totally different. You're thinking of the L Style/Joker Driver carbon shafts.
These...
https://www.joker-driver.net/shopdetail/...recommend/

The Joker Driver Zero Shafts are a different beast. They have front/rear plastic inserts and a carbon fiber center.
A lot more expensive..
https://www.joker-driver.net/shopdetail/007000000005/
Almost a $100 for a set
Reply
(12-01-2014, 06:10 PM)majeek Wrote: Those are really nice but expensive. $18/set here. They also have the 2-tone carbon shafts. Black and purple. Or is it L-Style? They really are good stuff. They are not Robin Hood proof but RH resistant only. Meaning they break after more or less 5 RH occurences.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images. clearly talking about different ones than these.
Reply
Regulatori beat me to it Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(12-01-2014, 06:15 PM)Cyanide Wrote:
(12-01-2014, 06:10 PM)majeek Wrote: Those are really nice but expensive. $18/set here. They also have the 2-tone carbon shafts. Black and purple. Or is it L-Style? They really are good stuff. They are not Robin Hood proof but RH resistant only. Meaning they break after more or less 5 RH occurences.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images. clearly talking about different ones than these.

Ahh yes. Clearly I was thinking of other Carbon shafts. But they cost more than the darts itself. They should place a warranty on those items. Replaceable when broken due to normal use.
Reply
(12-01-2014, 06:11 PM)Regulatori Wrote: Nice!
I was going to buy a set back when I had my Joker Driver barrels.

They come with the two different rear sections, correct? One for standard flights, one for Fit flights?

Definitely one of the best carbon setups around...it's a actual REAL carbon fiber weave with a gel coating.



Ohhhhh those extra pieces is all that for?

I gotta try, I ended up buying some joker driver flights just to use it ( was told I needed to)

I always used L-style carbon shaft including L-style L3 flights, they are great! But these are just soooo beautiful!



Yeah these came out to be $130 including shipping + 2 sets of flights.


I will give a review, but at this time don't know how to review shafts Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Yeah, I think it was Cosmo that was selling magnesium stems at one point for $150. Can't remember where I read it but someone broke a set and actually had someone with a metallurgy background check out a set and found the magnesium to be sub-par/porous.

I was given a set of those regular Joker Driver stems for free (someone had a set and they were too long) and I ended up ordering an extra set after....within 6 months I had broken all of them. The flight tongs would not bend like a normal nylon stem and would instead just snap off if you robin hooded the stem. They work fine if you use the L Style/Whizlock caps but I found them too brittle....others have liked them though.

Never saw anyone with the Joker Driver Zero Carbons before...they do look too pretty to use. lol

I know a few people that use the Fit Flight/Cosmo carbon stems and have yet to break one.
Reply
(12-01-2014, 06:30 PM)JMK420 Wrote:
(12-01-2014, 06:11 PM)Regulatori Wrote: Nice!
I was going to buy a set back when I had my Joker Driver barrels.

They come with the two different rear sections, correct? One for standard flights, one for Fit flights?

Definitely one of the best carbon setups around...it's a actual REAL carbon fiber weave with a gel coating.



Ohhhhh those extra pieces is all that for?

I gotta try, I ended up buying some joker driver flights just to use it ( was told I needed to)

I always used L-style carbon shaft including L-style L3 flights, they are great! But these are just soooo beautiful!



Yeah these came out to be $130 including shipping + 2 sets of flights.


I will give a review, but at this time don't know how to review shafts Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Definitely the sexiest stem setup.
Just post pics when you get them...maybe weigh them? Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Yeah, they include the front and rear inserts in case you break one since those are the high stress areas....you are not going to snap that carbon fiber center section any time soon.

You can order extra sets from Joker Driver in different colors.
https://www.joker-driver.net/shopdetail/...recommend/
Reply
(12-01-2014, 06:37 PM)Regulatori Wrote:
(12-01-2014, 06:30 PM)JMK420 Wrote:
(12-01-2014, 06:11 PM)Regulatori Wrote: Nice!
I was going to buy a set back when I had my Joker Driver barrels.

They come with the two different rear sections, correct? One for standard flights, one for Fit flights?

Definitely one of the best carbon setups around...it's a actual REAL carbon fiber weave with a gel coating.



Ohhhhh those extra pieces is all that for?

I gotta try, I ended up buying some joker driver flights just to use it ( was told I needed to)

I always used L-style carbon shaft including L-style L3 flights, they are great! But these are just soooo beautiful!



Yeah these came out to be $130 including shipping + 2 sets of flights.


I will give a review, but at this time don't know how to review shafts Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Definitely the sexiest stem setup.
Just post pics when you get them...maybe weigh them? Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Yeah, they include the front and rear inserts in case you break one since those are the high stress areas....you are not going to snap that carbon fiber center section any time soon.

You can order extra sets from Joker Driver in different colors.
https://www.joker-driver.net/shopdetail/...recommend/


Hmm, cant read Japanese, do they ship to Canada?
Reply
I believe so. Not positive though.
Best bet is use the Global Rakuten market....a few Japanese websites have one so international buyers can order parts easily.

The only problem is that it's a pain to search for items. You can find the parts on the Japanese website but trying to find the same part in the website's Rakuten storefront is kind of a pain.

Here is a start..
https://global.rakuten.com/en/store/hive...702000762/

This the shaft setup for sale in Dartshive Japan's Rakuten storefront. Your mission, if you choose to accept it, is to find the same items below in the Rakuten version storefront. It's a pain..you'll have to try searching for item numbers, copy/pasting Japanese text in the search box, etc...

But here are the items in the actual Japanese store.

All Joker Driver stem items...
https://www.dartshive.jp/category/2596.html


Replacement carbon fiber pieces...
https://www.dartshive.jp/item/22236.html (example...this is a #7...make sure you get the correct tube length)

Replacement barrel/stem connections. They come in two different lengths....not sure why they don't show the threads in the pictures.
Short..
https://www.dartshive.jp/item/22234.html
Long..
https://www.dartshive.jp/item/24925.html

Rear flight section...
https://www.dartshive.jp/item/22235.html
https://www.dartshive.jp/item/24926.html

Maybe I am wrong and the system is only designed for Fit Flight systems.
I honestly can't tell the difference between the last two rear section items.
Reply




Users browsing this thread: 1 Guest(s)
Loxley Darts.