Harrows Darts.

Show Us Your Set Up (you play on)
(11-27-2020, 05:07 PM)WoodGuy Wrote: I built the case many years ago.  It is sized to fit the foam surround.  The dart holder and surround light I built this year.

Nice set up there.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(11-27-2020, 05:21 PM)Hazza Wrote:
(11-27-2020, 05:07 PM)WoodGuy Wrote: I built the case many years ago.  It is sized to fit the foam surround.  The dart holder and surround light I built this year.

Nice set up there.

Thanks.  I'm pretty proud of how it turned out.
Reply
Just finished this.  $25 for a speaker stand so my wife doesn’t get annoyed with the noise.  $30 in 15 feet of LED light strips.  Scrap plywood leftover in my shop just taking up room.  £10 rotafix Mount    Got myself the equivalent of a corona light for a fraction of the cost and about a half hour of my time!Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Very busy looking set up at the moment....need to space things out a bit, or keep,everything to one side. The webcam is very out of the way so no issue , I get used to it.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images. 

Work is slowing down.  . Finally got to play some VS MATCHES Guests cannot see images in the messages. Please register at the forum by clicking here to see images. 
Took me a few matches to warm up. Played a best of 9vs a Russian. And then a best of 5 vs a Mexican 
Very nice to have opponents camera on big screen, temporary set up for now, too many screens and devices. Lucky I didn’t crack anything with a bounce out yet


The Russian man was a pleasure to play. His English not the best but counted his scores fine, just aswell or better than my English counting,  I miscounted a 64 out and took out 74 thinking.” Hoorah”. But he corrected me and I took My zero score but still won the leg after. I missed the t16 so I went 16 -8-bull for 74 LOL Sade to say that wasn’t my only counting error that match 
The Mexican man had his board upside down / camera  reversed and mirrored. so it was a bit difficult keeping track of where he was going To go. He didn’t speak or call out scores. Just wiggled the dart when he hit his out.he had Audio because Mexican radio with pop was blasting in the back round.
Reply
(09-08-2020, 09:50 PM)Cels Wrote: I put a second set up in the garage...
Yours is much nicer than mine...Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
My darts room is nearly there a few more days and a little graft and ill be happy!!Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Photo 
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(12-31-2020, 07:41 PM)mofodarts Wrote: [Image: https://i.imgur.com/qmjWQ30.jpg]

I’m on my way
Guests cannot see images in the messages. Please register at the forum by clicking here to see images. 
Current Board 
Blade 5 with Corona Surround and Unicorn number ring
Darts
Modified Unicorn Striker with RD medium sparkle stems, hardcore  charcoal flights and Target titanium stem rings   

Playing 40 years on and off and still barely average
Reply
Since Christmas Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
SUPERDARTS MAX GRIPPER 22


Instagram toddg.darts
Twitter toddg.darts

Reply
(10-10-2020, 05:20 PM)Cape Fear Wrote: Here is mine - Blade 4 Dual Core, home made light cabinet based off a Viper back board, home made darts rack

Would love to see better pics of the darts rack.
Reply
(01-01-2021, 02:24 AM)WoodGuy Wrote: Would love to see better pics of the darts rack.

There's really not much to it. It's a piece of pine 18" x 3.5" x 1" with a routed edge, and two key slot holes routed in the back. 13 sets of holes drilled 1.25" on center at about a 22° angle, with a little counter-bore. Spray painted black.

It's similar to the wooden racks they sell on Amazon but it holds more darts and I had fun building it myself. 

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(12-31-2020, 07:41 PM)mofodarts Wrote: [Image: https://i.imgur.com/qmjWQ30.jpg]
Dude!

Verstuurd vanaf mijn MAR-LX1A met Tapatalk
Darts : Winmau Simon Whitlock 24gr
Board : Winmau Blade4
Reply
(12-04-2020, 10:59 PM)jonah86 Wrote: My darts room is nearly there a few more days and a little graft and ill be happy!!

That looks great!
Reply
(12-31-2020, 07:41 PM)mofodarts Wrote: .

Awesome setup!
Reply
(12-31-2020, 09:32 PM)Toddg Wrote: Since Christmas

Nice addition!
Reply




Users browsing this thread: 1 Guest(s)
Loxley Darts.