Target Darts.

Show Us Your Set Up (you play on)
My setup

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(12-30-2017, 09:36 PM)d0wnin Wrote: My setup


That light looks alot better with the wood background you have made


Sent from my iPhone using Tapatalk
Reply
Cheers (Y)
Reply
(12-30-2017, 09:36 PM)d0wnin Wrote: My setup

That looks like wall art. Very NICE...Nicely done.  :thumbup: :thumbup:
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
DAYTONA FIRE JP-01JP-02, DF-10, DF-11 & DF-01
Reply
nice one! made of old palet wood?
Darts : Winmau Simon Whitlock 24gr
Board : Winmau Blade4
Reply
(12-31-2017, 09:25 AM)pirke Wrote: nice one! made of old palet wood?


Actually old floor boards. Renovating my house and took them up so decided to make use of them rather than burning  Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
This is my new set up, The only Vinyl I had left over was the grey and green so I went with Unibet which will be changed soon again it was just for a bit of fun in a comp over xmasGuests cannot see images in the messages. Please register at the forum by clicking here to see images.over xmas
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Nothing special atm!!

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Darts:  Target "Agora" 01 22g, Target "Titanium Pixel Stems", RD "Hardcore" Flights
            Showtime Darts  "Revolution" 23g with RD "NitroTech" Stems short, RD "Hardcore"  Flights
            
Dartboard Set Up:  One80  "Gladiator III", Unicorn "HD" Metal Number Ring, Target "Corona"  Surround
                               Winmau "Blade5"






Reply
(01-08-2018, 05:28 PM)Damien Kelly Wrote: This is my new set up, The only Vinyl I had left over was the grey and green so I went with Unibet which will be changed soon again it was just for a bit of fun in a comp over xmas

That looks awesome! Did you buy that back piece or what is that? Besides vinyl i mean
Match darts - 22g Customs
Best 501 - 11 Darts
Reply
(01-10-2018, 05:57 PM)John_B Wrote:
(01-08-2018, 05:28 PM)Damien Kelly Wrote: This is my new set up, The only Vinyl I had left over was the grey and green so I went with Unibet which will be changed soon again it was just for a bit of fun in a comp over xmas

That looks awesome! Did you buy that back piece or what is that? Besides vinyl i mean

It's just a sheet of mdf, painted and covered in Matt vinyl. The door part on the left was to cover the socket I had with the previous light above the board
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
    Since my board is in our family/TV/audio room and I expect to have a lot of novice throwers playing I needed a rather large backboard to protect the wall. I designed it for easy removal so that the painting that usually resides in that spot can be switched out in a matter of seconds when need be.

The backboard measures 32x36. It is 2 in thick insulation foam board covered with a nice felt like grey fabric. It's nice because no holes show in the fabric from errant darts. I'll just post a picture of the board for now. All my available photos of the room need to be resized which is a PITA. My camera is in the shop or I'd take some new ones. But until then here's the money shot anyway.
Liberal heathen
Reply
(01-16-2018, 11:58 PM)cubdog Wrote: Since my board is in our family/TV/audio room and I expect to have a lot of novice throwers playing I needed a rather large backboard to protect the wall. I designed it for easy removal so that the painting that usually resides in that spot can be switched out in a matter of seconds when need be.

The backboard measures 32x36. It is 2 in thick insulation foam board covered with a nice felt like grey fabric. It's nice because no holes show in the fabric from errant darts. I'll just post a picture of the board for now. All my available photos of the room need to be resized which is a PITA. My camera is in the shop or I'd take some new ones. But until then here's the money shot anyway.

Nice and clean, the "painting size" surround doesn't look out of place.  However, the Nodor Sportcraft is what catches my eye.  Haven't seen one of those in a while, and looks in great shape!

cheers...
Reply
Datadart icon 23grams, phase5 stems, slimflights.
Got these last year and love them Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(01-08-2018, 05:28 PM)Damien Kelly Wrote: This is my new set up, The only Vinyl I had left over was the grey and green so I went with Unibet which will be changed soon again it was just for a bit of fun in a comp over xmasover xmas


How did u get hold of the Unibet signs? Or did you paint them yourself. Im looking to do something like this.


Sent from my iPhone using Tapatalk
Reply
(01-18-2018, 02:46 PM)foxsake Wrote:
(01-08-2018, 05:28 PM)Damien Kelly Wrote: This is my new set up, The only Vinyl I had left over was the grey and green so I went with Unibet which will be changed soon again it was just for a bit of fun in a comp over xmass


How did u get hold of the Unibet signs? Or did you paint them yourself. Im looking to do something like this.


Sent from my iPhone using Tapatalk

You can mostly find these logos on the net, in a file format for professional print (vector, .epx, .ai).

ie. Unibet can be found here:
https://seeklogo.com/vector-logo/312574/unibet#

but, you'll need a program like Adobe Illustrator to open these files to print on a large scale.
Darts : Winmau Simon Whitlock 24gr
Board : Winmau Blade4
Reply




Users browsing this thread: 1 Guest(s)
Loxley Darts.