Cuesoul

How i store my Darts
   
Love these I got off a guy on Facebook, also have a plastic Shot stand and the Winmau block holder
https://youtube.com/channel/UC860EqDFXJLK8cXQNxzjJVA
Different Darts Bullseye Challenge
Reply
(10-14-2022, 11:16 PM)Wattsdarts Wrote: Love these I got off a guy on Facebook, also have a plastic Shot stand and the Winmau block holder


Love these.
Reply
Another one tried, this is the old star holder with a place for one set of flights, like the idea might need to mod it some as the flights are hard to get out if you stick them all the way in, might see if i can open the front some

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
So drilled into cabinet, left side I have strait barrels, right side have shaped barrels, then top of shelf have  two sets plus one I’m currently using.
   
20g Blue Plasma with 35mm mission points Cuesoul TRAJ AK8 flights. (I think last ones for a while)!!!
May be ending dart run and just move to home practice when I can, Darts take a lot of effort to throw at least for me and commitment may be more than life will allow. 

Be Safe and Good Darts!
Reply
Another holder tried this morning, it's not bad needs to be a bit bigger, can hold some extra shafts but to small for flights, will hold a 3rd set in the middle holes without flights would be better will a be a bit tight with them on

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Hasn't been as cold lately so was able to get my printer dialed in, found this flight holder thought i'd try it out, think it holds 24 sets

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(03-14-2023, 09:06 PM)Crusher17 Wrote: Hasn't been as cold lately so was able to get my printer dialed in, found this flight holder thought i'd try it out, think it holds 24 sets

[Image: https://i.imgur.com/4uBTKKdl.jpg]
[Image: https://i.imgur.com/1utYpL5l.jpg]
That's awesome.
Reply
Guests cannot see images in the messages. Please register at the forum by clicking here to see images. Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Messing around with changing colors, did this in Darren's favorite colors green & gold 
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Tried a number ring, not sure if it will stay together, only some small clips that will hold it 
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
(03-18-2023, 03:07 PM)Crusher17 Wrote: Tried a number ring, not sure if it will stay together, only some small clips that will hold it 

Number ring looks great! I had a unicorn HD number ring with the clip-on plastic numbers for a while, but stray bad double attempts kept breaking them. I’d considered printing replacements, but then got the metal HD ring and forgot about it. Let us know how it works when you put it on the board!
Reply
(03-19-2023, 06:48 AM)pkittle Wrote:
(03-18-2023, 03:07 PM)Crusher17 Wrote: Tried a number ring, not sure if it will stay together, only some small clips that will hold it 

Number ring looks great! I had a unicorn HD number ring with the clip-on plastic numbers for a while, but stray bad double attempts kept breaking them. I’d considered printing replacements, but then got the metal HD ring and forgot about it. Let us know how it works when you put it on the board!

Just waiting on some superglue from Amazon, will update it once i get it done, also working on a Target ring, it should hold up alot better
Reply
number ring looks awesome.
Reply
Playing around with a few new designs & colors, Trying some stuff for next month when i go to a tourney & hopefully make a few $$$, still fighting the cold in the room so easier to control the smaller printer

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
No reason to make this one,  Da Dart Dart Ha Ha Ha just because lol

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply
Thought i'd try a Chalk Holder, it worked out good doesn't quite tighten enough to keep the chalk from slidingGuests cannot see images in the messages. Please register at the forum by clicking here to see images.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  If you were a darts buyer for a major store.... Nucky 11 300 03-23-2022, 04:19 PM
Last Post: Nucky



Users browsing this thread: 1 Guest(s)
Loxley Darts.