Diy dart board lights
This is how I made my cheap lights.

Materials used:

Flat aluminium bar 2mm x 25mm x 2000mm 8,95€

Wall/ceiling brackets from Ikea 2€/piece

M4 bolts and nuts

2 meters of light strip from ebay ~5€


First I made a ring out of the flat bar and attached it with a piece of aluminium and some M4 bolts and nuts

[Image: a844crI.jpg]

Then I flattened end of the holders and drilled a hole to the holders

[Image: BHSgAzW.jpg][Image: LckYkli.jpg]


After that I drilled holes to the ring and attached the holders to the ring with pop rivets


[Image: QcHpssg.jpg]

Then I installed the led strip and secured the cable with cable ties

[Image: gal6vFt.jpg]

Final testing

[Image: PMSDrw5.jpg]
Reply
You could fit a ring or rim with a set of old Xmas lights on clips and pop those Cree LED lamps in them. Big Grin

hammertime
I got me a set of Wolf ram 24 grams and a board that is the envy of all... saving

New: 23 gram Winmau and 22 gram Bulls.
Reply
Nice DIY Lighting, looks good
Reply
Here is the final product

[Image: HK7BOOd.jpg]
Reply
(09-15-2020, 06:38 PM)MrStair Wrote: Here is the final product

Great job !!!
If you know what I'm doing, don't tell me .... I find bliss in my confusion.
Reply
I'm also doing one, this is just the prototype, so far. Tongue

[Image: N3BdwaR.jpg]
I got me a set of Wolf ram 24 grams and a board that is the envy of all... saving

New: 23 gram Winmau and 22 gram Bulls.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  New dart board set-up PecosJoe 5 521 07-13-2019, 05:18 PM
Last Post: nixer55



Users browsing this thread: 1 Guest(s)