Cosmo stem broke in flight

[Bigshow]

The stem snapped at the top where the flight goes in. It has snapped flush with the flight and I can't get a grip of it to pull it out. Do any of you nutz have any bright ideas on how to get it out. The flight is just new on. Raging.

[guest2]

I use a map pin. Push it through the stem inside the flight then pull!

[Getagrip]

Never heard them snap like that before!

[*Saber*]

heat a eye glass flat screw driver push into stem only let cool- pull stem out.

[DIRTY G]

suck it out

[*Saber*]

suck it out

with your lips and my brains we could suck in a million

[Getagrip]

talk it out, nicely!

[Bigshow]

I've tried all the above suggestions with no joy. I emailed cosmo in the hope that they have a method that can help or perhaps they will send me out a set of flights ( probably not ). Cheers everyone for trying to help.

[brenthahn]

If understand your dilemma, only a teeny weeny pilot hole and wood screw (which you'd yank out) would do the job. Don't know if they make wood screws that small. Maybe a tiny self-tapping sheet metal screw?

I killed a Cosmo with a robin hood, but you've got me beat!

[Bigshow]

That's a good idea brenthahn, I'll have look around the tool shed and see what I can dig out.

[*Saber*]

that sounds good let us know how it works out.

[Getagrip]

so you even tried the talking? Maybe you weren't nice enough Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

[*Saber*]

cuss it lol

[DIRTY G]

squeeze it like a pimple lol

[Bigshow]

I couldn't find a screw small enough to try brenthahns idea but I'll go to the hardware store at some point as I think it will work a treat.

I got a reply from cosmo saying 'Buy some more'...... Thanks for the help cosmo. You can f$%^ right off.