My home set up

[tonywalsh00]

Here we have my little set up.
I used to have just a normal light on my board, which was fine but there was a lot of shadows on the board which was quite annoying.
The board I'm using at the moment is the Winmau Blade 4, which i really like. Before that i used a Target Pro Tour board, which is a fantastic board also.
I bought the R2EVO MAXLite360 lighting system from ebay and the difference on the board cannot be compared, as shown in the pictures below. Very happy with my set up at the moment and having a good set up is making me want to practice and play more! 

Before 

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

After

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

[Humdinger]

Looks great. I like the colour of the light. Much better than the "Railway Station Toilet White" light that the target version produces.

[O C]

I can't see any of the images.

[Getagrip]

cant see pics

[tonywalsh00]

I uploaded the images from image shack are they not showing up? I can see them on my laptop. Any suggestions please? Thanks

[Tez Tickle]

Pics are showing fine on my ipad.

Cheers
Tez

[tonywalsh00]

Looks great. I like the colour of the light. Much better than the "Railway Station Toilet White" light that the target version produces.

The company i got it from on ebay has a massive selection of colours and you can pick your own colours for the outer ring and the side of the ring. I was looking at the Bulls Termote System but didn't like the look of it and shipping to Ireland was going to cost me a fortune

[Jameshaven]

I can see that it fits with a rubber surround too, was it difficult? Didn't have to cut anything I mean.

[tonywalsh00]

I can see that it fits with a rubber surround too, was it difficult?  Didn't have to cut anything I mean.

No it was very easy it just pops around the board and sits onto the board with the rubber ring behind it. The light is made for a Blade 4/5 but it can be adjusted to fit other boards and the instructions are included

[Jameshaven]

I can see that it fits with a rubber surround too, was it difficult?  Didn't have to cut anything I mean.

No it was very easy it just pops around the board and sits onto the board with the rubber ring behind it. The light is made for a Blade 4/5 but it can be adjusted to fit other boards and the instructions are included

Brilliant thanks man.