Weight of Diamond Conversion Points

[Ancient Darter]

Was just wondering if anyone knows the actual weight of these points?

I remember that generally, for the same design, the brass fitting usually weight more than the aluminium fitting.

https://www.dartscorner.co.uk/product_in...ts_id=4627

https://www.dartscorner.co.uk/product_in...ts_id=4626

[Shotgun]

1.7g each iirc.
I can verify that after work.

Need to correct me: 3.66g for a Set of 3

[Ancient Darter]

Thanks Shotgun!  Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

[Shotgun]

You´re welcome.

But i need to Correct me. I found the Pic on my Harddisk.
They are 3.66g for a Set of 3 so 1.22g Each.

Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

[Ancient Darter]

Vielen Dank! Ich schätze diese!  Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

1.22g is something I could work with if I remove 1 thread, and file down part of the aluminium. Great stuff Shotgun!  Guests cannot see images in the messages. Please register at the forum by clicking here to see images.

[Shotgun]

:thumbup: