Posts: 167
Threads: 12
Joined: Jan 2016
Reputation:
12
Country:
I had a few stems brake because of Robin Hoods lately and wanted to do something against it. So I looked out for some of this Cap Systems like the Whizlock.
Do they work with Target Pro grip stems? Would be thankful for any information.
Darts: Taylor 8zero Black Ti 24g, Chizzy Gold 24g, Barney Phase 5 23g, Paul Nicholson 24g, and so on...
Highout: 125 (T20-T15-D10)
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Posts: 1,267
Threads: 43
Joined: Feb 2014
Reputation:
242
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
[attachment=7331]
may all the doubles be with you
Posts: 1,267
Threads: 43
Joined: Feb 2014
Reputation:
242
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
may all the doubles be with you
Posts: 3
Threads: 0
Joined: Aug 2016
Reputation:
0
Country:
08-26-2016, 12:07 AM
(This post was last modified: 11-04-2019, 12:59 PM by nixer55.)
I find they work really well with Progrip stems.
One of the draw backs with the wizlock system is that there can be a space between the point of the cap and the flight when it's all put together.
I have found that it actually works best with progrip stems. I use the clear tinted progrip stems. The material is a bit harder than the opaque ones so I have found that sanding the end of the shaft (the last 3 or 4 mm) with a fine grit paper makes them fit snug.
Also, I think thinner flightswork better. I think the ones I have are 100microns
Jonathan
