Posts: 54
Threads: 19
Joined: Jun 2018
Reputation:
0
Country:
anyone knows the best shafts to use with robson flights?
a shaft where the robson goes all the way in ???
thx
22GR WOLFIES
22GR J WADE PHASE 1
23GR MVG ORIGINALS
shot! 9ti2 22gr/ clic shaft tweeny
target rvb 95 23gr/ original setup
winmau sub-zero torpedo 23 gr/ clic shaft tweeny
harrows fire tapered 22 gr/ clic shaft tweeny
harrows ice 22g
winmau stratos 24gr shark grip/ original setup
daytonas soft tip front weighted 20g
target carrera soft tip 20g
power 80 20g soft tip
phase 5 24g
and lots of designas
Posts: 3,321
Threads: 25
Joined: Nov 2016
Reputation:
139
Country:
(05-09-2019, 07:16 AM)bdebbane Wrote: anyone knows the best shafts to use with robson flights?
a shaft where the robson goes all the way in ???
thx
Unicorn Gripper 3 spring to my mind. It didn't hold as tight as Pro Grips, however I liked the almost smooth transition. And it definitely held better than the common flights usually sit on these Grippers 3 shafts. In the end though, the shafts that I used to use the most with Robsons were Target Pro Grip spinners.
BTW, the black and green flights were tighter than the other ones that I had - white, blue, pink. The black and green didn't go fully at the stem.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Posts: 810
Threads: 36
Joined: Nov 2017
Reputation:
22
Country:
I've only used them on Pro Grips & Unicorn Mirage Clears, I really like them on the clear shafts, especially when you get them cleaned up and get all the silly text off the stems!
Posts: 258
Threads: 11
Joined: Mar 2018
Reputation:
10
Country:
I have found they work well with a number of different shafts, except aluminum, because no one should be using those bendy things Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Robsons are one of my favorite flights. I wish they had some decent designs.
Posts: 810
Threads: 36
Joined: Nov 2017
Reputation:
22
Country:
(05-13-2019, 05:54 AM)blink180 Wrote: I have found they work well with a number of different shafts, except aluminum, because no one should be using those bendy things Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Robsons are one of my favorite flights. I wish they had some decent designs. I quite like their basic look, takes out the hours/money spent trying to colour match! 
Sent from my SM-G965F using Tapatalk
Posts: 208
Threads: 15
Joined: Aug 2018
Reputation:
29
Country:
(05-13-2019, 05:54 AM)blink180 Wrote: I have found they work well with a number of different shafts, except aluminum, because no one should be using those bendy things Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Robsons are one of my favorite flights. I wish they had some decent designs.
Printing on molded flights is expensive. The only option really is pad printing which really limits what you can do.
Posts: 2,130
Threads: 16
Joined: Dec 2018
Reputation:
68
Country:
(05-13-2019, 09:30 AM)Cosmo Darts Europe Wrote: (05-13-2019, 05:54 AM)blink180 Wrote: I have found they work well with a number of different shafts, except aluminum, because no one should be using those bendy things Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Robsons are one of my favorite flights. I wish they had some decent designs.
Printing on molded flights is expensive. The only option really is pad printing which really limits what you can do.
I really like the look of the Jose Perales flights - my finger is hovering over the Buy Now button Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
B: 23g S: Short F: No. 6 180s: 0/13
Posts: 385
Threads: 23
Joined: Mar 2015
Reputation:
4
I put some Robson flights on extra short winmau prism stems, over the weekend, seemed to fit snugly and pushed down Mickey all the way, only had 2 pop off in about 2 hours if playing
23g dobey phase 2
Extra short stems
Target no2 flights
Posts: 446
Threads: 4
Joined: Feb 2018
Reputation:
1
Country:
05-13-2019, 01:09 PM
(This post was last modified: 05-13-2019, 01:10 PM by SparkVendetta.)
I have used Robson flights with various Harrows, Winmau, Designa and One80 stems. The best fit was with One80 Vice stems: https://www.dartscorner.co.uk/index.php?..._1148_2382
The narrow top of the Vice stems makes the fit almost perfect... after you have removed the ring..
Started June 2017
Favorite darts in use: Designa Mustang V2 21g/23g; Winmau Vendetta 22g
Boards: One80 Gladiator II; Nodor Supabull ("old school")
Best leg: 14 darts
Highest checkout: 160
180's 2018: 14
180's 2019: 55
180's 2020: 75
180's 2021: 9
Posts: 258
Threads: 11
Joined: Mar 2018
Reputation:
10
Country:
(05-13-2019, 09:34 AM)jt4527 Wrote: (05-13-2019, 09:30 AM)Cosmo Darts Europe Wrote: (05-13-2019, 05:54 AM)blink180 Wrote: I have found they work well with a number of different shafts, except aluminum, because no one should be using those bendy things Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Robsons are one of my favorite flights. I wish they had some decent designs.
Printing on molded flights is expensive. The only option really is pad printing which really limits what you can do.
I really like the look of the Jose Perales flights - my finger is hovering over the Buy Now button Guests cannot see images in the messages. Please register at the forum by clicking here to see images.
Those Perales flights do look good.
I understand it must be tricky to print on molded flights, but I'm not worried about paying top dollar, if it works and it looks nice I will buy it.
Posts: 54
Threads: 19
Joined: Jun 2018
Reputation:
0
Country:
05-21-2019, 07:40 AM
(This post was last modified: 07-23-2019, 04:44 PM by nixer55.
Edit Reason: Removed quoted pics
)
(05-09-2019, 09:36 PM)elevendarter Wrote: (05-09-2019, 07:16 AM)bdebbane Wrote: anyone knows the best shafts to use with robson flights?
a shaft where the robson goes all the way in ???
thx
Unicorn Gripper 3 spring to my mind. It didn't hold as tight as Pro Grips, however I liked the almost smooth transition. And it definitely held better than the common flights usually sit on these Grippers 3 shafts. In the end though, the shafts that I used to use the most with Robsons were Target Pro Grip spinners.
BTW, the black and green flights were tighter than the other ones that I had - white, blue, pink. The black and green didn't go fully at the stem.
wow ! those pentas look nice!
22GR WOLFIES
22GR J WADE PHASE 1
23GR MVG ORIGINALS
shot! 9ti2 22gr/ clic shaft tweeny
target rvb 95 23gr/ original setup
winmau sub-zero torpedo 23 gr/ clic shaft tweeny
harrows fire tapered 22 gr/ clic shaft tweeny
harrows ice 22g
winmau stratos 24gr shark grip/ original setup
daytonas soft tip front weighted 20g
target carrera soft tip 20g
power 80 20g soft tip
phase 5 24g
and lots of designas
Posts: 810
Threads: 36
Joined: Nov 2017
Reputation:
22
Country:
Just discovered last night that the Robson text also comes off nicely with nail varnish remover, the white Astras look so pretty now!
Sent from my SM-G965F using Tapatalk
Posts: 3,321
Threads: 25
Joined: Nov 2016
Reputation:
139
Country:
(05-21-2019, 07:40 AM)bdebbane Wrote: wow ! those pentas look nice!
I've got them in 22g.
https://www.ebay.ie/itm/PENTATHLON-NVO2-...vuQPEsTEsA
Posts: 54
Threads: 19
Joined: Jun 2018
Reputation:
0
Country:
(05-21-2019, 10:02 AM)elevendarter Wrote: (05-21-2019, 07:40 AM)bdebbane Wrote: wow ! those pentas look nice!
I've got them in 22g.
https://www.ebay.ie/itm/PENTATHLON-NVO2-...vuQPEsTEsA i wanted to buy the same but dartscorner told me they are an old model and they don't make them anymore.
thank god for ebay Guests cannot see images in the messages. Please register at the forum by clicking here to see images. !
22GR WOLFIES
22GR J WADE PHASE 1
23GR MVG ORIGINALS
shot! 9ti2 22gr/ clic shaft tweeny
target rvb 95 23gr/ original setup
winmau sub-zero torpedo 23 gr/ clic shaft tweeny
harrows fire tapered 22 gr/ clic shaft tweeny
harrows ice 22g
winmau stratos 24gr shark grip/ original setup
daytonas soft tip front weighted 20g
target carrera soft tip 20g
power 80 20g soft tip
phase 5 24g
and lots of designas
Posts: 3,321
Threads: 25
Joined: Nov 2016
Reputation:
139
Country:
(05-22-2019, 07:07 AM)bdebbane Wrote: (05-21-2019, 10:02 AM)elevendarter Wrote: (05-21-2019, 07:40 AM)bdebbane Wrote: wow ! those pentas look nice!
I've got them in 22g.
https://www.ebay.ie/itm/PENTATHLON-NVO2-...vuQPEsTEsA i wanted to buy the same but dartscorner told me they are an old model and they don't make them anymore.
thank god for ebay Guests cannot see images in the messages. Please register at the forum by clicking here to see images. !
It's the Darts Clearance eBay shop. Most of darts that they offer are just prototypes and once they're sold out it's likely they won't be made again. At least some of their models are done in smaller numbers while some other models are offerred repeatedly. Darts Clearance is a highly recommended shop here on the Nutz. BTW, I didn't know these Pentathlons were available at Darts Corner.
|