Darts Nutz Darts Forum
Show Us Your Set Up (you play on) - Printable Version

+- Darts Nutz Darts Forum (https://www.dartsnutz.net/forum)
+-- Forum: ALL ABOUT DARTS (https://www.dartsnutz.net/forum/forumdisplay.php?fid=11)
+--- Forum: Show Us Your: Darts Set Up, Grip, Special Shots etc (https://www.dartsnutz.net/forum/forumdisplay.php?fid=66)
+--- Thread: Show Us Your Set Up (you play on) (/showthread.php?tid=60)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48


Show Us Your Set Up - pietjeekes - 12-09-2018

A new board in the house. It is the Gran boarding 3. Now i can play in the house. I'm a happy man.[Image: 369b32e3a30661d07ad38b386ed71e5a.jpg]


Show Us Your Set Up - davidbush05 - 12-13-2018

(05-11-2018, 08:51 PM)bob p Wrote: Hi All,

I'm new to the forum and just started playing a few months back..  I've been a woodworker much longer.
Here is the cabinet I built from plans.  I added lighting too.

Dart Cabinet

The Cabinet is much nicer than my throw..  But I'm working on that.
Thx
Bob


Beautiful work Bob!!



Sent from my iPhone using Tapatalk


Show Us Your Set Up - cking10304 - 12-14-2018

Here's my travel setup. I modified a Unicorn on Tour portable system with some dense foam on the backside to make the board completely stable and less noisy. It stands out a bit from the door now but solid. Ditched the Eclipse Pro that it comes with for the B5 and Pro 50 slim surround. Target Corona light. McKicks mat with raised oche. It's kind of a bit to transport, but I WILL throw darts on a proper setup every day no matter what or where . Cheers all, enjoy the World Championship! [Image: 84fbcd995c101ad093227500a4779c92.jpg][Image: 49bf5a8428198b4ce03513445a891bd5.jpg]

Sent from my Pixel using Tapatalk


RE: Show Us Your Set Up - Kyle1984 - 12-15-2018

[attachment=19310]


RE: Show Us Your Set Up - DeAngelo73 - 12-19-2018

Here is ours,..stillin Progress  Smile

[Image: 889mwr57.jpg]

[Image: mallaibx.jpg]

[Image: mn9bxrld.jpg]


RE: Show Us Your Set Up - Brice14 - 12-24-2018

Moved to a new apartment recently so I don't have the best set up but it does the job


RE: Show Us Your Set Up - ChrisTheFish - 12-29-2018

Looks great already, looking forward to seeing it all prettied up and ready to go


Show Us Your Set Up - Shima - 12-29-2018

Here is mine nothing special[Image: d9eb674543002ceb3e8093c02dcc4c57.jpg]

Gesendet von meinem WAS-LX1 mit Tapatalk


RE: Show Us Your Set Up - ChrisTheFish - 12-29-2018

More space than I have


Show Us Your Set Up - cking10304 - 12-30-2018

Very cool!

Sent from my Pixel 3 XL using Tapatalk


RE: Show Us Your Set Up - BDG - 12-30-2018

(12-30-2018, 03:06 PM)nixer55 Wrote: Well done!

(12-30-2018, 06:35 PM)cking10304 Wrote: Very cool!

Sent from my Pixel 3 XL using Tapatalk

Thank you good Sirs,

The pads are about the same off-set / height at as the Gran mount. The back of the board lightly rubs the felt pads as the board slides into place. This means that all additional increase in pad height puts stress on the board side mount. Know this and everything will be fine.
[Image: bljI9K4.jpg]



Here is a list of tools used for this project...
- hand drill : 1/4, and 11/36 bits,
- screw driver
- hand saw
- piece of crap  plastic Miter Box for 45 degree cuts
- hammer
- finishing nails
- razor blade knife
- spray Adhesive

No special skills required. Cutting the edge molding can be a little tricky.
2 x 2 MDF is sold pre-cut.
You can even make your trim and lumber cuts at the lumber store if you have your measurements.


RE: Show Us Your Set Up - SlingBlade - 12-31-2018

+1 on this work. Very nicely done


RE: Show Us Your Set Up - Dan180 - 12-31-2018

Pretty much straight forward from me!!


Show Us Your Set Up - Chris Allan - 01-05-2019

My first dart board set up

[Image: aa2fd20879def9606572231eec5956bc.jpg]


Sent from my iPhone using Tapatalk


RE: Show Us Your Set Up - ChrisTheFish - 01-05-2019

Nice job